Double Knife Cutter Guillotine

Double Knife Cutter Guillotine

Stack cutter for veneers and other materials.

The pack is placed on the machine table and up against the limit stop. The rear cutting line is clearly marked by a guide light and the front cutting line by an adjustable optimization laser. Hence the cutting lines of the two knives and the resulting veneer waste are visible. Once the cutting width is selected, the cutting cycle is executed automatically: The table moves into cutting position, the pressure bar clamps the veneer pack in place, the top and bottom knife cut both sides ready for jointing, and the table returns to the alignment position. Pre-cutting and finish-cutting are possible for high-stress veneer. Veneer strips are cut only with the top knife in incremental mode.

Important Features

  • Exact laser guide light: The green LED guide light clearly marks the cutting position.
  • Positioning Control System: For diverse modes of operation and storable program operations.
  • Precise Knifes: Cuts of high quality thanks to the swin- ging and powerful drawing motion of the knives at an angle of approximately 20°.
  • Maximum Security: Occupational safety regulations are met by a light barrier safety device, electric safety control system and swivelling protective gratings.

View Photos and Videos of Double Knife Cutter Guillotine

Double Knife Cutter Guillotine
Double Knife Cutter Guillotine
previous arrow
next arrow
Double Knife Cutter Guillotine
Double Knife Cutter Guillotine
Double Knife Cutter Guillotine
Double Knife Cutter Guillotine
previous arrow
next arrow

Technical Data

Insertion Height = 80mm

Cutting Range = 20 – 470 mm

Machine table = Positioning drive, 2 ball-screw-assembly

Pressure bar = 3 hydraulic cylinders, 2 pressure stages

Top knife = Brake motor, gearing, crank drive

Bottom knife = 1 hydraulic cylinder

Limit stop = Compressed air connection 6 bar

Total connected load = 10.5 kW

Cutting Length = 2810mm (2800), 3210mm (3200), 3810mm (3800), 4210mm (4200)

Floor Space = 495x152cm (2800), 535x152cm (3200), 595x152cm (3800), 635x152cm (4200)

Height = 200cm (2800), 204cm (3200), 204cm (3800), 204cm (4200).